Zoning

From Wikipedia, the free encyclopedia

Zoning is a term used in urban planning for a system of land-useregulation in various parts of the world, including North America, the United Kingdom^{[citation needed]}, and Australia. The word is derived from the practice of designating permitted uses of land based on mapped zones which separate one set of land uses from another.

Scope

Theoretically^{[citation needed]}, the primary purpose of zoning is to segregate uses that are thought to be incompatible; in practice, zoning is used as a permitting system to prevent new development from harming existing residents or businesses. Zoning is commonly controlled by local governments such as counties or municipalities, though the nature of the zoning regime may be determined by state or national planning authorities. In Australia, land under the control of the Commonwealth (Federal) government is not subject to state planning controls. The United States and other federal countries are similar.

Zoning may include regulation of the kinds of activities which will be acceptable on particular lots (such as open space, residential, agricultural, commercial or industrial), the densities at which those activities can be performed (from low-density housing such as single family homes to high-density such as high-rise apartment buildings), the height of buildings, the amount of space structures may occupy, the location of a building on the lot (setbacks), the proportions of the types of space on a lot (for example, how much landscaped space and how much paved space), and how much parkingVictoria, Australia, land use zones are combined with a system of planning scheme overlays to account for the multiplicity of factors that impact on desirable urban outcomes in any location. must be provided. The details of how individual planning systems incorporate zoning into their regulatory regimes varies though the intention is always similar. For example, in the state of

Most zoning systems have a procedure for granting variancesproperty in question. (exceptions to the zoning rules), usually because of some perceived hardship caused by the particular nature of the

Types of residential zones would be R1 for single-family homes, R2 for two-family homes, and R3 for multiple-family homes.

Types

Zoning codes have evolved over the years as urban planning theory has changed, legal constraints have fluctuated, and political priorities have shifted.^[1] The various approaches to zoning can be divided into four broad categories: Euclidean, Performance, Incentive, and Design-based.

Euclidean

Named for the type of zoning code adopted in the town of Euclid, Ohio, Euclidean zoning codes are by far the most prevalent in the United States,^{[citation needed]} used extensively in small towns and large cities alike. Also known as "Building Block" zoning, Euclidean zoning is characterized by the segregation of land uses into specified geographic districts and dimensional standards stipulating limitations on the magnitude of development activity that is allowed to take place on lots within each type of district. Typical types of land-use districts in Euclidean zoning are: residential (single-family), residential (multi-family), commercial, and industrial. Uses within each district are usually heavily prescribed to exclude other types of uses (residential districts typically disallow commercial or industrial uses). Some "accessory" or "conditional" uses may be allowed in order to accommodate the needs of the primary uses. Dimensional standards apply to any structures built on lots within each zoning district, and typically take the form of setbacks, height limits, minimum lot sizes, lot coverage limits, and other limitations on the building envelope.

Euclidean zoning is utilized by some municipalities because of its relative effectiveness, ease of implementation (one set of explicit, prescriptive rules), long-established legal precedent, and familiarity to planners and design professionals.

However, Euclidean zoning has received heavy criticism for its lack of flexibility and institutionalization of now-outdated planning theory (see below).

Performance

Also known as "Effects-based planning", Performance Zoning uses performance-based or goal-oriented criteria to establish review parameters for proposed development projects in any area of a municipality. Performance zoning often utilizes a "points-based" system whereby a property developer can apply credits toward meeting established zoning goals through selecting from a 'menu' of compliance options (some examples include: mitigation of environmental impacts, providing public amenities, building affordable housing units, etc.). Additional discretionary criteria may also be established as part of the review process.

The appeal of Performance Zoning lies in its high level of flexibility, rationality, transparency and accountability.^{[citation needed]} Performance Zoning avoids the arbitrary nature of the Euclidian approach, and better accommodates market principles and private property rights with environmental protection. However, performance zoning can be extremely difficult to implement and can require a high level of discretionary activity on the part of the supervising authority.

Incentive

First implemented in Chicago and New York City, incentive zoning is intended to provide a reward-based system to encourage development that meets established urban development goals.^{[citation needed]} Typically, a base level of prescriptive limitations on development will be established and an extensive list of incentive criteria will be established for developers to adopt or not at their discretion. A reward scale connected to the incentive criteria provides an enticement for developers to incorporate the desired development criteria into their projects. Common examples include FAR (floor-area-ratio) bonuses for affordable housing provided on-site and height limit bonuses for the inclusion of public amenities on-site.

Incentive zoning allows for a high degree of flexibility, but can be complex to administer. The more a proposed development takes advantage of incentive criteria, the more closely it has to be reviewed on a discretionary basis. The initial creation of the incentive structure in order to best serve planning priorities can also be challenging and often requires extensive ongoing revision to maintain balance between incentive magnitude and value given to developers.

Form-based

Form-based zoning relies on rules applied to development sites according to both prescriptive and potentially discretionary criteria. These criteria are typically dependent on lot size, location, proximity, and other various site- and use-specific characteristics.

Design-based codes offer considerably more flexibility in building uses than do Euclidean codes, but, as they are comparatively new, may be more challenging to create. When form-based codes do not contain appropriate illustrations and diagrams, they have been criticized as being difficult to interpret.

One example of a recently adopted code with design-based features is the Land Development Code adopted by Louisville, Kentucky in 2003. This zoning code creates "form districts" for Louisville Metro. Each form district intends to recognize that some areas of the city are more suburban in nature, while others are more urban. Building setbacks, heights, and design features vary according to the form district. As an example, in a "traditional neighborhood" form district, a maximum setback might be 15 feet from the property line, while in a suburban "neighborhood" there may be no maximum setback.

Zoning in UK

Main article: Development control in the United Kingdom

Development Control or Planning Control is the element of the United Kingdom's system of Town and Country Planning through which local government regulates land use and new building. It relies on the "plan-led system" whereby Development Plans are formed and the public consulted. Subsequent development requires Planning permission, which will be granted or refused with reference to the Development Plan as a material consideration.

There are 421 Local Planning Authorities (LPAs) in the United Kingdom. Generally they are the local Borough or District Councilunitary authority. Development involving mining, minerals or waste disposal matters is dealt with by County Councils in non-metropolitan areas. Within national parks, it is the National Park Authority that determines planning applications. or a

Zoning in Australia

Main article: Development control in Australia

Statutory planning otherwise known as town planning, development control or development management, refers to the part of the planning process that is concerned with the regulation and management of changes to land use and development.^[2]

Zoning in New Zealand

Main article: Resource Management Act 1991

New Zealand's planning system is grounded in effects-based Performance Zoning under the Resource Management Act.

Zoning in USA

Main article: Zoning in the United States

Zoning regulations fall under the police power rights state governments may exercise over private real property.

Origins and history

Special laws and regulations were long made, restricting the places where particular businesses should be carried on. In the 1860s a specific State statute prohibited all commercial activities along Eastern Parkway (Brooklyn), setting a trend for future decades.^{[citation needed]}

In 1916, New York City adopted the first zoning regulations to apply city-wide as a reaction to construction of The Equitable Building (which still stands at 120 Broadway). The building towered over the neighboring residences, completely covering all available land area within the property boundary, blocking windows of neighboring buildings and diminishing the availability of sunshine for the people in the affected area. These laws, written by a commission headed by Edward Bassett and signed by Mayor John Purroy Mitchel, became the blueprint for zoning in the rest of the country, partly because Bassett headed the group of planning lawyers which wrote The Standard State Zoning Enabling Act that was accepted almost without change by most states. The effect of these zoning regulations on the shape of skyscrapers was famously illustrated by architect and illustrator Hugh Ferriss.

The constitutionality of zoning ordinances was upheld in 1926. The zoning ordinance of Euclid, Ohio was challenged in court by a local land owner on the basis that restricting use of property violated the Fourteenth Amendment to the United States Constitution. Though initially ruled unconstitutional by lower courts, the zoning ordinance was upheld by the U.S. Supreme Court.^[3].

By the late 1920s most of the nation had developed a set of zoning regulations that met the needs of the locality.^{[citation needed]}

New York City went on to develop ever more complex set of zoning regulations, including floor-area ratio regulations, air rights and others according to the density-specific needs of the neighborhoods.

Among large populated cities in the United States, Houston is unique in having no zoning ordinances. Houston voters have rejected efforts to implement zoning in 1948, 1962 and 1993.

References

1. ^ Holm, Ivar (2006). Ideas and Beliefs in Architecture and Industrial design: How attitudes, orientations, and underlying assumptions shape the built environment. Oslo School of Architecture and Design. ISBN 8254701741.
2. ^ Gleeson B. and Low N., Australian Urban Planning: New Challenges, New Agendas, Allen & Unwin, St Leonards, 2000.
3. ^ Village of Euclid, Ohio v. Ambler Realty Co. (1926)